Control Seven Segment Display with Push Buttons

Design Challenge 1

In this challenge you will be asked to use push buttons to control the seven segment display on your FPGA board. Each digit of the seven segment display is composed of 7 LEDs arranged in a "figure 8" pattern with another LED for the decimal point. When the buttons are not pressed, all LEDs should be on. When a button is pressed, a digit should turn off.

eye 9.91K
×
Seven Segment Display Controller

Design Challenge 4

In this design challenge, you are going to finish a seven-segment decoder circuit that can can drive the 4-digit 7sd device on the Digilent board. We will take a hierarchical design approach to this problem, and the modules you designed in this design challenge will be reused in other projects as well.

eye 9.77K
×
Seven-Segment Display

Seven-Segment displays (7sd) are typically used in watches, calculators, and instruments to display decimal data. By lighting up a specified pattern of 7 LEDs, this type of decoder can create numbers 0-9 for digital display.

eye 3.99K
×