Project 2: Use Switches to Control LEDs
In this project, you will design and implement a circuit that controls an LED on your FPGA board with a slide switch. This project demonstrates how to use Verilog HDL to design a digital circuit and implement it on an FPGA board.
13.4K
Project 4: Majority of Five
How could you find a majority of the vote if each voter of five has a switch to vote for yes or no? The logic is fairly simple and will be used in this project. Any time there are three or more of the five who vote yes, then there is a majority and the LED needs to turn on.
11.4K
Project 9: Blinking LEDs
Flip-flop is an edge-triggered memory circuit. In this project, we will implement a flip-flop behaviorally using Verilog, and use a bunch of flip-flops to implement a clock divider that blinks the LEDs.
25.5K
Design Challenge 1
In this challenge you will be asked to use push buttons to control the seven segment display on your FPGA board. Each digit of the seven segment display is composed of 7 LEDs arranged in a "figure 8" pattern with another LED for the decimal point. When the buttons are not pressed, all LEDs should be on. When a button is pressed, a digit should turn off.
15.6K
Slide Switch, Push Button, and LED
Circuits often require inputs that come directly from users (as opposed to inputs that come from other devices). User-input devices can take many forms, among them keyboards (as on a PC), buttons (as on a calculator or telephone), rotary dials, switches and levers, etc.
4.81K
Project 2, Exercise 2
This exercise is based off of the material from Real Digital Project 2. You will download a .bit file to your board to configure the FPGA with eight different logic circuits. The circuits use buttons and switches for inputs, and LEDs for outputs. You must probe the logic circuits by applying all possible combinations of input signals, and from the results write logic equations that describe the circuit’s behavior.
3.03K
Vivado Project 2: Use Switches to Control LEDs
In this project, you will design and implement a circuit that controls an LED on your FPGA board with a slide switch. This project demonstrates how to use Verilog HDL to design a digital circuit and implement it on an FPGA board.
9.80K