Design Challenge 1
In this challenge you will be asked to use push buttons to control the seven segment display on your FPGA board. Each digit of the seven segment display is composed of 7 LEDs arranged in a "figure 8" pattern with another LED for the decimal point. When the buttons are not pressed, all LEDs should be on. When a button is pressed, a digit should turn off.
15.4K
Project 2, Exercise 2
This exercise is based off of the material from Real Digital Project 2. You will download a .bit file to your board to configure the FPGA with eight different logic circuits. The circuits use buttons and switches for inputs, and LEDs for outputs. You must probe the logic circuits by applying all possible combinations of input signals, and from the results write logic equations that describe the circuit’s behavior.
2.96K